The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared waves that are produced when the carbon fiber is heated. Carbon fiber has high thermal conductivity, which allows you to reduce current consumption and thus save on heating. During operation, the heater does not heat the air itself, but heats the surrounding objects and the human body (improves blood circulation in the body). The main part of the radiator is made of a polymer heating foil resistant to bending and breakage, on which graphics with a pattern are applied. The whole is fastened with wooden slats. The design of the radiator allows it to be rolled into a roll, which, combined with its low weight, makes it easy to carry. In addition, the switch on the cord allows for easy operation and selection of power levels. The simple design and lack of mechanical parts translate into the longevity of the device. Specification- Total area of the heating element: 0.56 m2 - Operating voltage in the mains: 230 V / 50 Hz - Power: 430 W - 2 power levels - regulator on the cord - Total length of the power cord - 150 cm - Recommended heated area: 10-12 m? - Nominal current consumption: 1.8 A - Maximum surface temperature: 75C - Required time to reach operating temperature: 40-60 seconds - Operating time: continuous (adjustable by thermostat) - Outer film safety category: IP20 - Electrical safety category: II - Dimensions: 100x57 cm - Mounting: Wall The set includes- Infrared heater 430W TRIO - Holding hook - User manual - Manufacturer's packaging Features- Innovative flexible panel using infrared technology - More efficient heating than conventional heaters - Carbon fiber heating foil - The design of the radiator resembles a picture - Can be rolled into a roll - 2 power levels - regulator on the cord - Quick and simple installation - Does not dry out the air in the room - Power: 430 W
The ESPERANZA FUZZ clothes shaver is a practical device for removing pills from clothes, upholstery, blankets and other textiles, thanks to which they will look like new for longer. The ergonomic shape fits perfectly in the hand. The transparent waste container shows when to empty it. The shaver removes pills quickly and effectively. Practical textile refresher THREE POWERFUL BLADES PRACTICAL WASTE CONTAINER COMPACT, LIGHTWEIGHT AND HANDY Power supply: 2 AA batteries (not included) Material: High quality plastic Dimensions: 10.0 x 16.5 x 7.0 [cm] Shaving head diameter: 5.0 cm
XTREME gas sensor detector with the possibility of configuring the device using built-in Wi-Fi and a dedicated TUYA SMART LIFE application. If carbon monoxide is detected, the sensor emits audible and optical warnings using a red LED. It is designed to monitor enclosed rooms for the presence of flammable gases: methane, ethane and propane, butane. Specification: Power supply: AC 230V/50Hz Device Type: B Standby Draw Power: 1.5W Alarm Volume: 70dB/1m WiFi: 2.4G - 802.11 b/g/n Alert Level: 6% LEL +/-3% LEL Allowable Operating Environment Temperature: -10~50 degrees C Allowable Operating Environment Humidity: 10%~95%RH Supported languages of the Tuya App: Polish, English, German, French, Italian, Spanish, Portuguese, Russian Supported languages of the Smart Life App: Polish, English, Czech, Slovak, German, Slovenian, Lithuanian, Ukrainian, Latvian, French, Italian, Spanish, Portuguese, Dutch, Russian and many more Key features: High quality workmanship Easy installation Audible and optical alarm Built-in Wi-Fi Possibility to configure the device using the dedicated TUYA SMART LIFE app It is designed to monitor enclosed rooms for the presence of flammable gases: methane, ethane and propane, butane. SHELF LIFE OF THE DEVICE The average lifespan of a device (electronic sensor) is about 5 years. This time is strictly dependent on the environmental conditions in which the device was operated, the date of manufacture, the number of alarm activations, etc.) It is recommended to regularly replace worn-out models with new ones.
A traditional bulb used in popular microwave models available on the market. Specification: Power: 20W Supply Voltage: 230V Colour: 2700K (warm white) Connectio
Silicone baking tin in the shape of LEGO bricks. It is equipped with as many as 10 holes of various shapes. It is perfect for baking thanks to its high heat conductivity, which reduces its time and saves energy. It is extremely flexible, does not require additional lubrication and can be used on various layers - ceramic board, granite or even Teflon. Product Features: Silicone donut mold in the shape of 10 LEGO bricks. The silicone mold is suitable for baking in gas and electric ovens, as well as for cooling and freezing. Reusable. With proper use, it will serve for a long time. They do not absorb odors and are suitable for the preparation of sweet and salted bread, chocolate and cookies. The property of silicone molds is high thermal conductivity, which reduces baking time by up to 30% and saves energy. The mold does not require greasing - thanks to a special silicone, the dough does not stick to the walls of the mold. They are characterized by great flexibility, they can be crumpled or rolled up and hidden in a drawer, and when removed, it always returns to its previous shape. It is very easy to use and clean (washing with warm water, sponge or in the dishwasher). Specification: Material: Silicone Temperature resistant from -40°C to +230°C Mold shape: 10x LEGO bricks Depth (block): 1.5 cm Mold dimensions: 14.5 cm x 8 cm Color: Red Packaging: foil We invite you to place an order!
